1973 - 1991 Chevy/GMC Truck Halo LED Taillights (Pair)

$200.00

These are an updated version of the classic 1973 - 1991 taillights! They come with an LED running/brake light that plugs directly into your stock socket and an integrated halo running light (red) and turn signal light (amber) that splices into your marker light harness. You will continue to use your stock reverse light and harness without modification. This light combination will provide a brilliant running light with a captivating start up sequence that will turn heads. Similarly, the turn signal provides a sequential animation that looks great while clearly indicating to other drivers that you’re making moves!

Notes:

LED-friendly flasher required for the turn signal to function.

BYOL: Bring your own lens (and gasket). We do not provide lenses at this time.

These are an updated version of the classic 1973 - 1991 taillights! They come with an LED running/brake light that plugs directly into your stock socket and an integrated halo running light (red) and turn signal light (amber) that splices into your marker light harness. You will continue to use your stock reverse light and harness without modification. This light combination will provide a brilliant running light with a captivating start up sequence that will turn heads. Similarly, the turn signal provides a sequential animation that looks great while clearly indicating to other drivers that you’re making moves!

Notes:

LED-friendly flasher required for the turn signal to function.

BYOL: Bring your own lens (and gasket). We do not provide lenses at this time.

Installation Tips:

  1. Remove the old taillight lenses and housings.

  2. Review the Wiring Tips below to determine the wiring method of choice.

  3. Mount the correct frame to each side of the truck using your stock hardware.

  4. Place the gasket inside of the frame.

  5. Secure the bulbs into the new housings and set the housing between the frame and the lens/

  6. Secure your lens to the frame using your stock hardware.

  7. Congratulations! You have installed the new taillights!


Wiring Tips:

  1. You can wire these a number of different ways to achieve the look you want.

  2. The black wire is the ground. For the perimeter light, the red wire is the running light. The yellow wire is the turn signal.

  3. The recommended wiring method is to convert the stock 2-wire setup to a 3-wire setup by using an adapter like this: https://www.amazon.com/dp/B08MZ9CC2S?psc=1&ref=ppx_yo2ov_dt_b_product_details . Using an adapter like this one will not trigger the turn signal when signal is sent to both taillights (i.e. when the brake pedal is depressed).

  4. If you want the running lights to turn on at startup and run continuously, you can connect the red wires to an accessory circuit in your system.

  5. If you want the lights to turn on and off like the stock setup, just splice the wires into your stock harness.



Legal Disclaimers and Terms of Use:

Shindell & Sons Motorworks LLC products are intended for off road or competition use only.

Shindell & Sons Motorworks products are intended and sold for off road use only. Use of these products is at the customer’s own risk. Products sold for off road use are intended for off-road and racing vehicles that may never be used on public roadways. These off road only products may be illegal in many municipalities.



By purchasing aftermarket, off road only products, the customer takes full responsibility for any use and/or misuse of the product and agrees that Shindell & Sons Motorworks LLC holds no responsibility for any consequences, legal, or otherwise, of such use and/or misuse.